This is an issue i confronted that seemed serious, but was simple.
If you are using a BARD, and your assist mac's do not work while the bard is using mq2twist, there is a simple fix. Open your MQ2MoveUtils.ini file in your MacroQuest2 folder. ..you should see
[Defaults]
AutoPause=on
BreakOnWarp=on
BreakDist=250.0
BreakOnGate=on
Verbosity=1
stuckDist=0.3
turnDirection=-10.0
stuckCheck=5
StuckLogic=on
LeashLength=100.0
CampRadius=25.0
MinDelay=3000
MaxDelay=8000
CHANGE
AutoPause=on to AutoPause=off
Problem fixed...you bard should now STICK to target without pausing to cast. or (SING) his twist.
Hope this helps.
If you are using a BARD, and your assist mac's do not work while the bard is using mq2twist, there is a simple fix. Open your MQ2MoveUtils.ini file in your MacroQuest2 folder. ..you should see
[Defaults]
AutoPause=on
BreakOnWarp=on
BreakDist=250.0
BreakOnGate=on
Verbosity=1
stuckDist=0.3
turnDirection=-10.0
stuckCheck=5
StuckLogic=on
LeashLength=100.0
CampRadius=25.0
MinDelay=3000
MaxDelay=8000
CHANGE
AutoPause=on to AutoPause=off
Problem fixed...you bard should now STICK to target without pausing to cast. or (SING) his twist.
Hope this helps.