- Joined
- Sep 30, 2005
- Messages
- 1,172
- Reaction score
- 0
- Points
- 0
Here is the Hud.ini that I use. Its nothing special just small and to the point of what I wanted. Hunger and thirst was to allow me to check and make sure mq2feedme is working properly with a 5000 threashold. I added the ability to show who group leader and raid leader was so I did not constantly have to open up that big ass raid window when I needed to know, these only show up when you are grouped and/or in a raid. There is also a number of people in raid counter that shows up when your in a raid just telling you the number in your raids. The stuff you see in yellow is the 4 closest rare spawn mobs starting with the closest at the top of the list to the 4th closest at the bottom. Basicly a rarespawn tracker without using track.
Now the "HOW TO MAKE THIS WORK" part.
1) Copy all of this below to a text file.
2) Click File tell it save as...
3) Save it as MQ2HUD.ini, >AND< Change the "Save as type to ALL FILES.
4) Tell it to save inside your release folder for your mq.*
5) In game type /loadhud cleric (or whatever the name of your hud is) then you are good to go and finished. Using the F11 key in game toggles the hud on and off.
If you did everything correctly in game you should see the image from the attachment on your screen.
*If you use Frys copy of MQ2 there is probably already a hud.ini there. You need to tell your computer YES to replace that one to use this one if you want this one.
One more thing to comment on, if you scroll down to the bottom of the code you see a seting called "Skipparse" I have mine set on 10. This seting is for how fast you want the hud to refresh/update. If you change that number to a 1, then it updates constantly. For some of us using older computers that causes alot of lag. At 10, the refresh rate is not constant but its almost faster than you can notice with the eye and does not cause nearly any lag.
Post if still cant figure it out and we will see if we can get you a hud going be it mine or someone elses.
Now the "HOW TO MAKE THIS WORK" part.
1) Copy all of this below to a text file.
2) Click File tell it save as...
3) Save it as MQ2HUD.ini, >AND< Change the "Save as type to ALL FILES.
4) Tell it to save inside your release folder for your mq.*
5) In game type /loadhud cleric (or whatever the name of your hud is) then you are good to go and finished. Using the F11 key in game toggles the hud on and off.
If you did everything correctly in game you should see the image from the attachment on your screen.
*If you use Frys copy of MQ2 there is probably already a hud.ini there. You need to tell your computer YES to replace that one to use this one if you want this one.
One more thing to comment on, if you scroll down to the bottom of the code you see a seting called "Skipparse" I have mine set on 10. This seting is for how fast you want the hud to refresh/update. If you change that number to a 1, then it updates constantly. For some of us using older computers that causes alot of lag. At 10, the refresh rate is not constant but its almost faster than you can notice with the eye and does not cause nearly any lag.
Post if still cant figure it out and we will see if we can get you a hud going be it mine or someone elses.
Code:
[Cleric]
Time=3,5,68,0,255,0,Time: ${Time}
LastTell=3,5,80,0,255,0,LastTell - ${MacroQuest.LastTell}
RegExp=3,5,92,0,255,0,EXP - ${Me.PctExp}%
AAExp=3,5,104,0,255,0,AAExp - ${Me.PctAAExp}%
FM=3,5,116,0,255,0,Full Mana in - ${Int[${Math.Calc[(${Me.MaxMana}-${Me.CurrentMana})/(${Me.ManaRegen}|1)/10]}]}m${Int[${Math.Calc[(${Me.MaxMana}-${Me.CurrentMana})/(${Me.ManaRegen}|1)%10*6]}]}s
Spawn1=3,5,128,255,255,0,${If[${NearestSpawn[1,npc #].Name.NotEqual["NULL"]},${NearestSpawn[1,npc #].Level},]} - ${If[${NearestSpawn[1,npc #].Name.NotEqual["NULL"]},${NearestSpawn[1,npc #].Name},]}
Spawn2=3,5,140,255,255,0,${If[${NearestSpawn[2,npc #].Name.NotEqual["NULL"]},${NearestSpawn[2,npc #].Level},]} - ${If[${NearestSpawn[2,npc #].Name.NotEqual["NULL"]},${NearestSpawn[2,npc #].Name},]}
Spawn3=3,5,152,255,255,0,${If[${NearestSpawn[3,npc #].Name.NotEqual["NULL"]},${NearestSpawn[3,npc #].Level},]} - ${If[${NearestSpawn[3,npc #].Name.NotEqual["NULL"]},${NearestSpawn[3,npc #].Name},]}
Spawn4=3,5,164,255,255,0,${If[${NearestSpawn[4,npc #].Name.NotEqual["NULL"]},${NearestSpawn[4,npc #].Level},]} - ${If[${NearestSpawn[4,npc #].Name.NotEqual["NULL"]},${NearestSpawn[4,npc #].Name},]}
GMInd1=3,5,176,0,250,0,${If[${Spawn[gm].ID},GM,]}
GMInd2=3,5,176,0,250,0,${If[${Spawn[gm].ID},,GM]}
GMInd3=3,27,176,250,0,0,${If[${Spawn[gm].ID},GM In Zone!,]}
GMInd4=3,27,176,0,250,0,${If[${Spawn[gm].ID},,None In Zone]}
GroupLeader=3,5,188,0,255,0,${If[${Group.Members}>0,GroupLDR - ${Group.Leader},]}
RaidLeader=3,5,200,0,255,0,${If[${Raid.Members}>0,RaidLDR - ${Raid.Leader},]}
PPLinRaid=3,5,212,0,255,0,${If[${Raid.Members}>0,In Raid - ${Raid.Members},]}
============================================================================================================================================================
[MQ2HUD]
Last=cleric
SkipParse=10
CheckINI=10
UpdateInBackground=on
ClassHUD=on
ZoneHUD=on
Attachments
Last edited: