MQ2MMOWarp

Plugin Info
Name	MQ2MMOWarp
Author	MMOBugs Developers
Link	Wiki Link
Commands	/warp /zwarp /setgrav /exactloc /wpoint (or /waypoint, see below)
Source Available	No
Uses INI File	Yes (for enabling active hacks and waypoints)

Description

MQ2MMOWarp allows you to move around the zone without running

Active Hack

See this forum post regarding the risks of active hacks.

To enable active hacks, in your MQ\config directory, edit macroquest.ini, and under the [Settings] section, modify or add the EnableActivePlugins value to 1 for enabled, 0 for disabled.

[Settings]
EnableActivePlugins=1

Then either /unload and reinject MQ, or camp EQ to desktop and start it again.

Commands

• /warp Warps, i.e. moves you instantly to the location, based on options provided
• /zwarp Warps you up or down in Z
• /setgrav Sets zone gravity
• /exactloc Shows your exact location
• /wpoint Manages waypoints (LIVE/TEST ONLY)
• /waypoint Manages waypoints (EMU ONLY)

Warp Command Usage

• /warp (s)uccor Warp to zone's succor point.
• /warp last Warp to the last warp destination.
• /warp return Return to the location prior to last warp.
• /warp loc <y x z> Warp to specific location.
• /warp dir <distance> Warp forward a distance.
• /warp id [<n | s | e | w> <distance>] Warp to spawn id or distance north/south/east/west from spawn id.
• /warp (t)arget [<n | s | e | w> <distance>] Warp to target or distance north/south/east/west from target.
• /warp (rt)arget [maxdist] Warp to target random direction & random 2-10u distance. If maxdist is provided, that is max random distance instead of 10.
• /warp (i)tem [<n | s | e | w> <distance>] Warp to item or distance north/south/east/west from item.
• /warp wp <waypoint name> Warp to a named waypoint.
• /warp compass Warp to the location indicated by the main compass line.
• /warp (b)ehind [distance] Warp behind your target
• /warp (f)ront [distance] Warp in front of your target
• /warp (l)eft [distance] Warp to the left of your target
• /warp (r)ight [distance] Warp to the right of your target

ZWarp Command Usage

• /zwarp [distance] Warp straight up or down in Z the indicated distance

SetGrav Command Usage

• /setgrav [default|value] Set gravity to default (0.4) or to given value

ExactLoc Usage

• /exactloc There are no options to this, it's basically the same as doing /loc

WayPoint Usage

• /waypoint [add|delete|update] WayPointName | [list] Note that for Live/Test servers, this command has been changed to /wpoint. Add, delete, or update the named waypoint. Waypoints are saved in your MQ config directory in the file called Waypoints.ini. Using the list option alone will list all waypoints for the current zone.

Example Usage

/warp [(s)uccor|last|loc <y x z>|dir <distance>|(t)arget [(n|rtarget <maxdist>|s|e|w) distance]|wp <wp name>]

• /warp t - Warps to Current Target
  

• /warp t e 5 - Warps 5 units East of target(can use any direction and number)
  

• /warp rt - Warps a random direction from, and random 2-10 units distance from Current Target
  

• /warp rt 25- Warps a random direction from, and random 2-25 units distance from Current Target
  

• /warp s - Warps To Succor Point
  

• /zwarp - Warps Vertically - Setgrav 0 before going higher then 200 units. Most zones are only 3000-5000 units high.
  

• /wpoint add <waypoint name> - Adds Warp Waypoint (LIVE/TEST ONLY)
  
• /waypoint add <waypoint name> - Adds Warp Waypoint (EMU ONLY)
  

• /exactloc - Gives Your Characters Exact Location
  

• /setgrav - Sets Zone Gravity
  

• /warp return - Returns you to where you were before you warped
  

Availability

This plugin is included with the MMOBugs Compile.