Hey everyone! This is a 100% free EverQuest hacking tool for Mac (on PC), Titanium (P1999), Underfoot, SoD and RoF2! Hopefully there will be more builds to come.
This will detect which build the client is and adjust the codes on the fly. You can use this program for more than 1 instance of the game at a time, including the autobot program.
MANUAL INSTALL REQUIREMENTS
Requires .NET Framework 4.6.2 - Download Microsoft .NET Framework 4.6.2 from Official Microsoft Download Center
Teleport requires C++ Redistributables - Download Microsoft Visual C++ 2010 Redistributable Package (x86) from Official Microsoft Download Center
AutoBot/AutoLogin requires AutoIt - https://www.autoitscript.com/cgi-bin/getfile.pl?autoit3/autoit-v3-setup.exe
AUTBOT SCRIPT FUNCTIONS
// - A comment in the script
teleport (x) (z) (h) - Teleport to x y z coordinates and face h (can be blank).
target (name) - Target an NPC or Player.
teleto (name) - Teleport to player or NPC by name
checkzone (short name) - Check if player is in zone before continuing with script execution
pause (milliseconds) - Pause the script for a set amount of milliseconds
checkgive - Check if give/trade window is open before continuing with script execution
talktoNPC (name) - Teleports you to the NPC and sends them a message (uses AutoIt)
say (message) - Says a message in game (uses AutoIt)
press (key) - Presses a key on your keyboard (uses AutoIt)
walkto (x) - Walk to coordinates (uses Autoit)
mouse (x) (click) - Move mouse cursor to x y coordinates. Specify click type (left, right, hold)
CheckPCNearby (x) (z) (distance) (ignore) - Check if players are nearby coordinates y x z. Can use Ignore variable to ignore names (use commas to separate names)
ClickButton (window) (button) - Clicks on a window's button (use fullscreen w/ monitor's resolution in game).
warpfollowtarget (name) - Follow a target via teleporting
HOTKEYS
CTRL+1 = Teleport to coordinates 1
CTRL+2 = Teleport to coordinates 2
CTRL+3 = Teleport to coordinates 3
CTRL+4 = Teleport to coordinates 4
CTRL+M = Open the EQTrainer Map form
CTRL+T = Teleport follow
DOWNLOAD
Files attached below this post. However, it does require a Patreon membership to New Age Soldier.
SUPPORT
You can post a reply if you want support, but chances are I won't see it for several days. If you want immediate support, I am in my Discord chat room 99% of the time.
SOURCE CODE
Source Code is now private. PM me if you want to contribute.
ADDING AN EQ BUILD
Believe it or not, EQTrainer can be used with any version of EverQuest! If you open the EQTrainer program folder (ex: "C:\Program Files (x86)\NewAgeSoldier\EQTrainer"), you will see a folder called "builds". This has other folders in it corresponding to other EverQuest builds.
The folder/file structure works like this:
Once these files are created, the next time you open EQTrainer you will see in the drop down box in the upper right corner that your "EQ Build Version Name" is there. If you filled out the builds.ini file with your folder name and date structure/address EQTrainer should know to switch over to that EQ Build Version automatically.
I would recommend checking EQEmu for the addresses, the MQ2 source code addresses or opening Cheat Engine and making a Cheat Table and finding the addresses yourself. You can find things like player and monster x y z coordinate addresses with the ShowEQ ini.
My project is open source available to anyone who wants to help work on it. Git repo available on the project site. Want to become a contributor? Just ask!
EQTrainer - YouTube
This will detect which build the client is and adjust the codes on the fly. You can use this program for more than 1 instance of the game at a time, including the autobot program.
Features List said:Teleport xyzh coordinates. Save,load,copy,erase options included!
Player Health, Mana, xyzh and experience displayed.
Target xyzh, level, class and health displayed.
Multiple game processes can be hacked simultaneously!
Bot program included. (beta)
Buff names and timers displayed.
Multiple EQ clients supported.
Lots of customizable hacking scripts included. Like ultravision, no stun, no blind, enduring breath and more!
Spawn list with names, addresses, xyzh and level information.
Can warp to spawn locations or force target from any distance.
Instant gate with any class. (currently not supported in Titanium)
Display player and bank money and show totals with rate conversion.
Mapping system with NPCs. (beta)
MANUAL INSTALL REQUIREMENTS
Requires .NET Framework 4.6.2 - Download Microsoft .NET Framework 4.6.2 from Official Microsoft Download Center
Teleport requires C++ Redistributables - Download Microsoft Visual C++ 2010 Redistributable Package (x86) from Official Microsoft Download Center
AutoBot/AutoLogin requires AutoIt - https://www.autoitscript.com/cgi-bin/getfile.pl?autoit3/autoit-v3-setup.exe
AUTBOT SCRIPT FUNCTIONS
// - A comment in the script
teleport (x) (z) (h) - Teleport to x y z coordinates and face h (can be blank).
target (name) - Target an NPC or Player.
teleto (name) - Teleport to player or NPC by name
checkzone (short name) - Check if player is in zone before continuing with script execution
pause (milliseconds) - Pause the script for a set amount of milliseconds
checkgive - Check if give/trade window is open before continuing with script execution
talktoNPC (name) - Teleports you to the NPC and sends them a message (uses AutoIt)
say (message) - Says a message in game (uses AutoIt)
press (key) - Presses a key on your keyboard (uses AutoIt)
walkto (x) - Walk to coordinates (uses Autoit)
mouse (x) (click) - Move mouse cursor to x y coordinates. Specify click type (left, right, hold)
CheckPCNearby (x) (z) (distance) (ignore) - Check if players are nearby coordinates y x z. Can use Ignore variable to ignore names (use commas to separate names)
ClickButton (window) (button) - Clicks on a window's button (use fullscreen w/ monitor's resolution in game).
warpfollowtarget (name) - Follow a target via teleporting
HOTKEYS
CTRL+1 = Teleport to coordinates 1
CTRL+2 = Teleport to coordinates 2
CTRL+3 = Teleport to coordinates 3
CTRL+4 = Teleport to coordinates 4
CTRL+M = Open the EQTrainer Map form
CTRL+T = Teleport follow
DOWNLOAD
Files attached below this post. However, it does require a Patreon membership to New Age Soldier.
SUPPORT
You can post a reply if you want support, but chances are I won't see it for several days. If you want immediate support, I am in my Discord chat room 99% of the time.
SOURCE CODE
Source Code is now private. PM me if you want to contribute.
ADDING AN EQ BUILD
Believe it or not, EQTrainer can be used with any version of EverQuest! If you open the EQTrainer program folder (ex: "C:\Program Files (x86)\NewAgeSoldier\EQTrainer"), you will see a folder called "builds". This has other folders in it corresponding to other EverQuest builds.
The folder/file structure works like this:
builds.ini <-- If you want auto detection, you need your (EQ Build Version Name) here with the proper date structure
builds/(EQ Build Version Name)/scripts <-- your .ini script files. See other script ini files for examples
builds/(EQ Build Version Name)/codes.ini <-- place your addresses here
builds/(EQ Build Version Name)/inject.dll <-- your injected codes the named pipe will communicate with (mostly used for the teleporting function)
Once these files are created, the next time you open EQTrainer you will see in the drop down box in the upper right corner that your "EQ Build Version Name" is there. If you filled out the builds.ini file with your folder name and date structure/address EQTrainer should know to switch over to that EQ Build Version automatically.
I would recommend checking EQEmu for the addresses, the MQ2 source code addresses or opening Cheat Engine and making a Cheat Table and finding the addresses yourself. You can find things like player and monster x y z coordinate addresses with the ShowEQ ini.
My project is open source available to anyone who wants to help work on it. Git repo available on the project site. Want to become a contributor? Just ask!
EQTrainer - YouTube
Attachments
Last edited: